Continuous instead of occasional
Every measuring cycle, adjustable from 10 seconds, the valve position of each mussel is measured. The result is an uninterrupted picture of your water, 24 hours a day, without anyone having to be on site.
The Mosselmonitor® (Musselmonitor) continuously measures the behaviour of eight live mussels and raises an alarm the moment water quality changes. No sampling, no waiting for the laboratory: you know as it happens.
Trusted by, among others







Monitoring water quality with samples and laboratory analyses is costly and slow, and very often the result is that nothing was wrong. A contamination that passes between two samples goes unnoticed. The Mosselmonitor sees it.
Every measuring cycle, adjustable from 10 seconds, the valve position of each mussel is measured. The result is an uninterrupted picture of your water, 24 hours a day, without anyone having to be on site.
A mussel filters water continuously and responds to what is in it, across a broad range of substances at once. Not a chemical sensor that sees a single compound, but a living organism that notices deviations.
When several mussels close at the same time, start flapping or open less and less, the potential-free alarm contact closes. Your control system can act immediately, for instance by stopping an intake.
Healthy mussels are open about 70 to 80% of the time to breathe and feed. When the water is contaminated their behaviour changes: they stay closed longer, flap, or open less and less.
Each shell half carries a small coil. The distance between the coils determines the induced signal and therefore the valve position. Eight mussels are read out individually and free of interference.
The built-in microcomputer converts every reading into a valve opening in percent, tests it against adjustable criteria and raises the alarm. Data are sent to your PC over the serial port.
Fresh or salt, clean or polluted: with the right mussel species the Mosselmonitor can be deployed in a wide range of situations.
Monitor the raw water before the intake. On an alarm the intake can be stopped automatically, before a contamination reaches the treatment plant.
Continuous insight into rivers, canals and lakes. The power supply is matched to your location.
Test your own discharge biologically, rather than against a list of substances only. You also see the effects of combinations that a chemical analysis misses.
With the blue mussel the system also works in salt water. Universities and research institutes use the Mosselmonitor for ecotoxicological research.
The Mosselmonitor has been in use for many years at drinking water utilities, in industry and at research institutions in the Netherlands and abroad. The technology is robust and simple: during an overhaul in Slovakia, a system turned out to have been in operation for 19 years.
With the supplied Present IT software you see the behaviour of each mussel live in a graph, store every measurement and communicate directly with the Mosselmonitor to change settings. Following several systems remotely is possible too.
Tell us about your water and your location. We are happy to think along and to propose an approach that fits your situation.